來自荷蘭 Ivium Technologies 的創新電化學/電池測試儀器

✓Scan range: ±30mA/±10V

✓FRA/EIS: 10µHz-1MHz

✓Size: 16 x 6.7 x 1.9cm

✓Weight: 300g

✓Available in ±30mA/±10V,
±800mA/±10V, ±250mA/±20V,
±30mA/±100V configuration

✓Scan range: ±30mA/±10V

✓FRA/EIS: 10µHz-1MHz

✓Low current ranges down to 10pA

✓Size: 22.3 x 6.7 x 1.9cm

✓Scan range: ±30mA/±10V

✓Size: 11.5 x 5.9 x 1.4cm

✓Compliance: ±100mA/±21V

✓ Optional FRA/EIS:
10µHz - 250kHz

✓Compliance: ±350mA/±13V

✓FRA/EIS: 10µHz to 1MHz
as standard

✓Optional Bipotentiostat

✓Optional True Linear
Scan generator

✓Available in several
current/voltage configurations

✓Current ranges: 100pA
up to 10A

✓Optional FRA/EIS: 10µHz
to 1MHz

✓Up to 8 modules/16 channels per frame
(stackable up to 64 channels) can be installed

✓Modules can be mix and matched for
maximum versatility

✓Multi-channel Potentiostat/Galvanostat/ZRA

✓8-channel Potentiostat/Galvanostat/ZRA

✓19" rack-mountable housing

✓Up to 128 channels/rack

✓Affordable high-spec electrochemical
test system

✓Each channel: Dedicated embedded FRA/EIS

✓IviumStat2.h scan range: ±5A/±10V

✓ IviumStat.XRe scan range: ±2A/±50V

✓XP40 (±40A/±10V), XP20 (±20A/±20V),
and XP10 (±10A/±40V)

✓Applied voltage range on all instruments
is ±10V

✓Optional FRA/EIS: 10µHz to 500kHz

✓Integrated current interrupt

✓Multi-channel battery test system

✓Each channel: ±30mA/±10V

✓Optional FRA/EIS: 10µHz-20kHz
on each channel for simultaneous testing

✓19″ rack-mountable housing

✓Multi-channel battery test system

✓Each channel: ±200mA/±10V

✓Optional FRA/EIS: 10µHz-20kHz
on each channel for simultaneous testing

✓19″ rack-mountable housing

✓Multi-channel battery test system

✓Each channel: ±1A/±5V

✓Optional FRA/EIS: 10µHz-20kHz
on each channel for simultaneous testing

✓19″ rack-mountable housing

✓Multi-channel battery test system

✓Each channel: ±3A/±5V

✓Optional FRA/EIS: 10µHz-20kHz
on each channel for simultaneous testing

✓19″ rack-mountable housing

✓Each channel: ±30mA/±10V
FRA/EIS: 10µHz-100kHz
(1MHz optional)

✓8-channel
Potentiostat/Galvanostat/ZRA

✓19″ rack-mountable housing

✓Each channel: ±200mA/
±10V FRA/EIS: 10µHz-100kHz
(1MHz optional)

✓8-channel
Potentiostat/Galvanostat/ZRA

✓19″ rack-mountable housing

✓Each channel: ±5A/±10V FRA/EIS:
10µHz-100kHz (1MHz optional)

✓8-channel
Potentiostat/Galvanostat/ZRA

✓19″ rack-mountable housing