產品功能
-
CMM-40
Industrial multimeterCMM-40Industrial multimeter CMM-40 was designed for the purpose of measurements of AC/DC voltage, AC/DC current, resistance, capacitance, frequency (electrical and electronic), duty cycle, temperature and also for testing diodes and continuity.加入諮詢加入諮詢 -
TKF-12
Phase Sequence TesterTKF-12The TKF-12 tester is a modern high-quality, simple and safe device. However it is recommended to get acquainted with he present manual in order to avoid measuring errors and prevent possible problems related to operation of the meter.加入諮詢加入諮詢 -
CMM-10
MultimeterCMM-10-
The most important features of CMM-10 are:
- Autoranging/manual range selection.
- DATA HOLD function, for holding measured values.
- REL function, which allows you to make measurements relative to a stored reference value.
- Continuity test with acoustic signalling (beeper).
- AUTO-OFF function.
- Display 3 7/8 digits (5000 max).
加入諮詢加入諮詢 -
-
DIT-500
IR thermometerDIT-500Temperature meters operating in the infrared are used to determine the temperature of the surface of the item. The optical system of the device detects the emitted, bounced and sent energy, which is collected and concentrated on the detector. Electronic system translates optical data into temperature value. In order to increase accuracy the laser pointer is built-in the device.
加入諮詢加入諮詢 -
DIT-130
IR thermometerDIT-130Temperature meters operating in the infrared are used to determine the temperature of the surface of the item. The optical system of the device detects the emitted, bounced and sent energy, which is collected and concentrated on the detector. Electronic system translates optical data into temperature value. In order to increase accuracy the laser pointer is built-in the device.
加入諮詢加入諮詢 -
UV-260
Corona CameraUV-260Being with high sensitivity UV-260 is a power tool to detect UV emission in full daylight with high signals from faraway and nearby sources. UV-260 is an ideal predictive maintenance device for overhead transmission lines and high voltage substations.
UV-260 is newest genaration of UV imaging system with an emphasis on high performance functionality and easy operation, it is widely used in transmission line inspection, electrical utilities, HV research institutes, HV electrical component inspection, HV panal inspection, service providers, laboratories and more.加入諮詢加入諮詢 -
DB-THERMO
Demonstration BoardDB-THERMODB-THERMO demonstration board is an essential device for every training on non-contact temperature measurement or thermal imaging. DB-Thermo helps to understand emissivity effects of various materials and material surface type effects which influence temperature measurement.加入諮詢加入諮詢 -
SRM-0R1-4k1
Decade resistorSRM-0R1-4k1SRM-1 is designated for imitation and value setting of active resistance of impedance in a short circuit loopwith 230/400 V voltage, 50/60 Hz AC. The required resistance is set by the user by means of decade switches of resistance boxes.加入諮詢加入諮詢 -
SRP-10G0-10T0
SRP-10G0-10T0The SRP-10G0-10T0 calibrator is a source of high resistance, used as a standard in calibration and tests of analogue and digital insulation resistance meters.加入諮詢加入諮詢 -
SRP-50k0-5T0
Standard programmable resistorSRP-50k0-5T0The SRP-50k0-5T0 calibrator is a source of high resistance, used as a standard in calibration and tests of analogue and digital insulation resistance meters.加入諮詢加入諮詢