產品功能
features
-
濾芯式過濾設備
ZP-260 SORBENT CARTRIDGESZP-260ZP-260吸附劑濾芯是為乾燥潤滑油和電氣絕緣油而設計的，使用沸石或其它吸附劑，設計用於乾燥潤滑油和電氣絕緣油。該裝置有一個艙口，用於快速裝載和卸載吸附劑。除了沸石，該裝置還可以填充其它吸附劑，如富勒土或硅膠，使其適用於油品再生和降低酸度。加入諮詢加入諮詢 -
固定式變壓器乾燥設備
CMM-260C STATIONARY TRANSFORMER DRYING UNITCMM260C水是變壓器的一個危險的敵人，它降低了變壓器油的介電強度，加速了油和固體絕緣的老化。要完全防止水進入變壓器是不可能的，因為無論服務質量或設備的密封性如何，都會形成水。但是，可以通過使用連續乾燥裝置CMM-260C來保護變壓器。該設備與變壓器相連，將其油通過微孔顆粒狀的吸附劑，使變壓器在整個使用壽命內保持乾燥。水分被吸附並可靠地保留在其晶體中。加入諮詢加入諮詢 -
雙極電流放大器
GMW Bipolar Current Amplifier231HC- GMW 231HC雙極電流放大器提供最高達到±70A、±160V的一個快速響應的真正雙極電流源，適用於 GMW電磁鐵包括機型5403、5403EG、5403AC、3472-70、3473-70及5451。
- GMW 231HC整合了Copley Controls梯度放大器231HC型及電容器組、輔助電源供應器、冷卻風扇和National Instruments的USB-6251資料蒐集控制模組在一個19吋機架安裝機櫃中，可提供16位元解析USB或直接類比編程的電流輸出。
- 搭配SGA DC電源供應器及GMW LVMCTRL LabVIEW控制軟體，可構成一套完整的電腦控制型雙極電源供應系統。
加入諮詢加入諮詢 -
高速數位攝影機
High-Speed Digital CamerasHS7高速度高解析Full HD（1920 x 1080）@2500fps，可讓HS7輕易捕捉到詳細的場景，進行令人驚嘆的慢動作播放。
具備Binning模式 : 這對影像解析度要求不高，而又有高幀速要求的應用，可採用此技術。加入諮詢加入諮詢 -
ECC-Opto-SBS
ECC-Opto-SBSECC-Opto-SBSTest cell for optical characterization in the reflective mode – with side-by-side arrangement of electrodes.
- Side-by-side (“face up”) arrangement of working and counter electrode
- Both electrodes simultaneously seen through a sapphire window
- Precisely adjustable distance of electrolyte gap between electrode edges
加入諮詢加入諮詢 -
RAK Water and Ration Heaters
RAK Water and Ration HeatersRAK- Heats 2 pints water and 5MREs in the vehicle while on the move
- Contents remains hot for up to 6 hours after the unit has been switched off
- " Cool to touch" outer casing
- Designed-in " Boil Dry" condition and fail safe mechanisms
- Connects to vehicles auxiliary power supply, 24 volts DC
- Heating range 66 to 71°C (on LO setting)
- Heating range 82 to 88°C (on HI setting)
- Ramp rate of 56°C in one hour (max) from ambient temperature of 21°C
加入諮詢加入諮詢 -
Integrity 10 Reaction Station
Integrity 10 Reaction StationIntegrity 10- 10 individual, independently controllable cells
- Temperature range of -30°C to 150°C
- Stirring rate of 350 rpm - 1200 rpm
- For sample volumes of 1ml - 25ml
- Optional attachments for refluxing, and working under inert conditions
- Optional multi-infrared probes for solubility/crystallisation studies
- Local control via colour touchscreen
加入諮詢加入諮詢 -
OS1025 STEM Omni Reaction Station
OS1025 STEM Omni Reaction StationOS1025- Interchangeable modular design
- Greater stirring stability and stir speeds of 100 - 800 rpm
- Simple menus and touchpad interface to control the system performance
- All heater cartridges are equipped with "in block heaters" that allow temperatures up to 220°C.
- High level of stability (± 1.5°C) across the heater cartridge itself
- An external temperature probe to increase temperature accuracy to 0.5°C
- An outer casing to retain the "cool to touch" safety feature that so many of our customers value
- Selected cartridges can also be used in conjunction with a cooling plug to extend the temperature range from - 30°C to 220°C
加入諮詢加入諮詢 -
HT9 Glass Fibre Heating Tapes
HT9 Glass Fibre Heating TapesHT9 Glass Fibre Heating Tapes- For high wattage applications
- has a braided earth wire beneath the outer sheath
- Operational temperature range up to 450°C
- Cord is spiralled around the tube being heated to give a surface loading power concentration up to 0.62W/cm
- Linear Loading: 164W/m (50W/ft)
- Available in different lengths from 2 feet (61cm) to 32 feet (976cm)
- Insulated unheated flexible lead at each end (9cm)
- Approximate width of 25mm
- All models have a voltage choice of 230V or 115V (except for HT95524 and HT95532 models which are available as 230V only)
- For use in dry conditions only
- Use of MC227 1-Way Controller, MC228X1 1-Way Controller or MC810B digital controller is recommended
加入諮詢加入諮詢 -
MM Series Micro-Kjeldahl Extraction Heaters
MM Series Micro-Kjeldahl Extraction HeatersMM Series Micro-Kjeldahl Extraction Heaters- Rugged, easy to clean stainless steel construction
- Back-mounted brackets hold flask support rods (supplied with each unit)
- 6 positions which can accommodate flasks of between 18 - 50ml capacity
- Maximum element temperature range of 550°C to 800°C
- Dedicated controllers for each recess are housed in a "cool zone"
- Grounded stainless steel earth screen covering the heating element
- Units are double fused for added safety
加入諮詢加入諮詢