0 like search mail home
選擇產品功能 arrow_down
>

TRAPChecker 超音波測漏設備

型號:TRAPChecker
  • TRAPChecker是一種超音波解決方案,它主要應用於閥門內漏和液壓系統的洩漏檢測。
  • 非常易於使用。 只需打開包裝盒,連接傳感器,即可了解疏水閥好壞之間的區別,並配以即時精確的檢測數值顯示於色彩豐富的顯示幕上。
  • 您多達40%的疏水閥可能處於故障狀態。TRAPChecker的低入門成本和高能源成效,可能會在您第一次使用它時,您的投資就已經得到了回報。
    • TRAPChecker是一種超音波解決方案,它主要應用於閥門內漏和液壓系統的洩漏檢測。
    • 非常易於使用。 只需打開包裝盒,連接傳感器,即可了解疏水閥好壞之間的區別,並配以即時精確的檢測數值顯示於色彩豐富的顯示幕上。
    • 您多達40%的疏水閥可能處於故障狀態。 TRAPChecker的低入門成本和高能源成效,可能會在您第一次使用它時,您的投資就已經得到了回報。
  • 功能

    超音波檢測設備

    可支援的

    RS2 接觸式感測器

    測量通道

    1個7針LEMO通道

    顯示

    160 x128 像素的彩色 OLED

    按鍵

    5個功能鍵

    測量範圍

    -6 到 99.9 dBμV(參考0 dB = 1μV,解析度0.1 dBμV)

    檢測頻帶

    35 to 42 kHz

    信號放大

    +30 to +102 in steps of 6 dB

    回應時間

    < 9毫秒

    環境

     

    工作溫度範圍

    -10 to +50 °C /14 to 122°F

    防護等級

    IP42

    設備

     

    材料和重量

    ABS, 164g | 5.78oz

    尺寸大小

    158x59x38.5 mm /6.22”x2.32”x1.51”

    感測器介面

    7針LEMO連接

    電池連接器

    USB Mini-B 5-pin

    電源

     

    電池

    2個5號電池

    待機

    4小時

    音訊

     

    放大率

    -24 to 0 dB by step of 6 dB

    最大輸出

    +83dB SPL with 25dB NRR Peltor HQ SDT 耳機

    • Inefficient steam systems waste energy and impact product quality. TRAPChecker is an ultrasound solution focused on finding failed steam traps. It works on every style of trap and failure mode.
    • TRAPChecker is so easy to use. Simply open the box, connect the sensor, and hear the difference between a good and bad steam trap. Its vibrant colour display offers repeatable, accurate, digital measurements.
    • As much as 40% of your steam traps could be operating in a failed state. The low entry cost of TRAPChecker and the high cost of energy, could see your investment recovered the first time you use it.
  • General
    Function Ultrasound measurement device
    Operable with SDT RS2 Needle Sensor
    Measurement interface 1 channel via a 7 pole LEMO connector
    Display 160x128 pixels Color OLED
    Keyboard 5 function keys
    Measuring range -6 to 99.9 dBµV (reference 0 dB = 1 µV)
    Resolution 0.1 digits
    Measurement bandwidth 35 to 42 kHz
    Signal amplification +30 dB to +102 dB by step of 6 dB
    RMS period time 250 milliseconds (main screen)
    Sampling frequency 64 kHz/ksps
    ADC Resolution 12 bits
    Environmental
    Operating temperature range -10 to +50 °C |14 to 122°F
    IP rating IP42
    EMC approvals EN 61326-1:2013, EN 55011:2016 + A1:2017, EN 61000-4-2:2009, EN 61000-4-3:2006
    + A1:2008 + IS1:2009 +A2:2010
    Mechanical
    Housing material ABS
    Dimensions 158x59x38.5 mm |6.22”x2.32”x1.51”
    Weight 164g | 5.78oz
    Battery/Utility connector USB Mini-B 5-pin
    Power
    Battery 2 AA batteries
    Autonomy 7 hours
    Audio
    Operable with SDT provided head set only
    Maximum audio output (protection) +83 dB SPL with SDT provided headset
    Headset 25 dB NRR Peltor quality heaphones