ECC-RefLoad
ECC-RefLoad 型號：ECC-RefLoadTool for loading reference materials such as lithium metal into ECC series test cells .
- Suitable for ECC-Ref, ECC-Combi, ECC-Air(-Ni), ECC-DEMS, ECC-Press(-DL), ECC Press-Air(-DL) ECC-Press-Aqu(-DL), ECC-Press-Air-Aqu(-DL), ECC-Opto-Std, ECC-Opto-SBS
- Ref cleaning toll set available
-
Tool for loading reference materials such as lithium metal into ECC-Opto-Std, ECC-Opto-SBS and ECC-Aqu test cells.
Basically, the tool is a small tube (cannula) with a knock-out pin inside. A tiny piece of lithium metal is first picked up by pressing the cannula onto a piece of lithium foil (>0.2 mm thick). The cannula is then inserted into the bore of the Ref-sleeve and the lithium inside the cannula is extruded into the Ref-bore by actuating the knock-out pin.
Gallery
Picking up lithium with the ECC-RefLoad
Using the ECC-RefLoad
Correct use: The Lithium is pushed to the inner edge of the Ref-sleeve – no more, no less.
Wrong use: Lithium protrudes beyond the inner edge of the Ref-sleeve. This may cause a short circuit in the assembled cell.
-
Length 62 mm Diameter 25 mm Weight 84 g