可攜式電化學分析儀

可攜式
體積小、重量輕 (<600g)和低功耗的特點。該儀器可通過 USB 介面從 PC 操作，無需額外供電。Ivium CompactStat.h 與筆記型電腦相結合，為腐蝕和分析應用提供了一個真正的移動電化學測量站 。
CompactStat.h 是收納在一個具有保護性硬質盒中，可容納所有電纜、電源供應器、測試標準件、電極夾，並有額外空間放置配件或可選購 Pelican® 全天候攜行箱。

低雜訊和電氣隔離
 儀器具電氣隔離的特點 ( 包括設備電源與來自個人電腦的 )。它具有出色的抗雜訊能力，能夠測量非常微小的訊號，這對奈米技術等應用至關重要。該儀器還可用於樣 品應與共地（Floating）斷開連接的情況。

完整的解決方案
CompactStat.h 提供了一完整的電化學功能軟體，所有標準的電化學技術都可在Ivium的軟體中找到。CompactStat.h 還整合了高性能頻率響應分析儀，可進行 10µHz 至3MHz 的 EIS 測量。所有測量和數據處理均可所提供的軟體中執行（適用於基於 Windows 的 PC）。

自動化
提供多個類比和數位輸入/輸出埠，用於監測和控制外部設備。此一功能都已獲得完整開發並整合到軟體中。

擴展性
可擴展為雙恒電位儀（需BiStat模組）；連接石英晶體微天平QCM並組成電化學石英晶體微天平E-QCM；連接表面等離子共振儀SPR構成電化學表面等離子共振儀E-SPR；控制旋轉圓盤電極RDE和旋轉盤環電極RRDE。

硬體：

• 自動電流範圍選擇： 1pA 至 1A/1mV  至 10V。
• 自動變量的雜訊濾波器和恒電位/恆電流儀穩定性設定。
• 同時取樣電流/電位和多達 8 個外部類比訊號。
• 即時數據顯示高達 500 pnts/s。高達100，000 pnts/s 的取樣儲存在儀器記憶體中。
• 可應用的掃描速率： 1µV/s 至 10,000V/s。
• 最小間隔時間：10 μs（0.125μs 解析度）。
• 通過自動調整濾波器、增益放大器和直流減去對結果進行最佳化。

軟體 :
CompactStat.h 通過 Ivium 自備的 IviumSoft 軟體進行控制。這款功能多樣、直觀易用的軟體可用於儀器控制、數據管理和分析等。IviumSoft 軟體還可與 LabVIEWTM、C++、Delphi 等軟體連接並由其控制。每台儀器都標配全套 IviumSoft 軟體。

CompactStat.h 功率放大器
為提高標準 CompactStat.h 儀器的功率（±30mA/±10V），可在主機加裝可選購的功率放大器。該功率放大器可在出廠前訂購，也可根據需要在以後訂購。

CompactStat.h 功率放大器有三款型號：

• CompactStat.h10800: ±10V/±800mA
• CompactStat.h20250: ±20V/±250mA
• CompactStat.h10030: ±100V/±30mA
   

將功率放大器整合到 CompactStat.h 中將大大增加應用的可能性。除了提供更高的電流/電壓外，還可自動選擇是否啟動功率放大器：

                    -     當 USB 供電時，功率放大器不啟動（±30mA/10V 可用）。
                    -     當使用AC供電時，功率放大器將自動啟動。         

通過這種方式，USB 供電的 CompactStat.h 的可攜使用的特點得以保留。

各機型選擇性

 

Portability
Small footprint (<600g) and low power consumption. The instrument can be operated via the USB port from a PC without additional power supply. In combination with a laptop computer, the Ivium CompactStat.h provides a truly mobile electrochemical measurement station for corrosion and analytical applications.

The CompactStat.h is delivered in a protective hardcase that holds all cables, power adapter, test cell, electrode clips and has extra space for your accessories. Optionally, a Pelican® all weather case is also available.

Low noise and galvanic isolation
The instrument is electrically isolated from power lines and PC. It has a superior noise immunity, and is capable of determining very small signals, essential for applications such as nano-technology. The instrument may also be applied in situations where the sample should be disconnected from a common ground (floating).

Complete solution
The CompactStat.h offers a complete package, and all the standard electrochemical techniques are available in our software. The CompactStat.h also has an integrated high-performance Frequency Response Analyser for EIS measurements from 10µHz to 3MHz. All measurement and dataprocessing software is included (for Windows based PCs).

Automation
Multiple analog and digital input & output ports are available for monitoring and control of peripheral equipment. This functionality is fully integrated in the software.

Expandability
The CompactStat.h can be expanded with a wide variety of options and modules, including a Bipotentiostat, True Linear Scan generator, various power boosters and multiplexers.

Hardware

• Automatic current range selection: 1pA to 1A/1mV to 10V．
• Automatic variable noise filter and potentiostat/galvanostat stability settings．
• Simultaneous acquisition of current/potential and up to 8 peripheral analog signals．
• Real time data display up to 500 pnts/s. Acquisition up to 100,000 pnts/s is stored in instrument memory．
• Applicable scanrates: 1µV/s to 10,000V/s．
• Minimum interval time: 10µs (0.125µs resolution)．
• Result optimalisation by automated tuned filters, gain amplifiers and DC-subtraction．

Software
The CompactStat.h is controlled via Ivium’s own IviumSoft. This versatile, yet intuitive software package allows instrument control, data management and analysis, peripheral instrument control, etc. IviumSoft can also interface with and be controlled from LabVIEWTM, C++, Delphi, etc. A full suite of IviumSoft is included with each instrument as standard.

CompactStat.h power booster
To increase the power of the standard CompactStat.h instrument (±30mA/±10V), an optional power booster can be integrated inside the housing. This power booster can be ordered ex-factory or, when the need arises, at a later time.

The CompactStat.h power booster is available in three models:

• CompactStat.h10800: ±10V/±800mA
• CompactStat.h20250: ±20V/±250mA
• CompactStat.h10030: ±100V/±30mA

The integration of a power booster into the CompactStat.h will greatly increase the application possibilities. In addition to the availability of higher current/voltage, an automatic selection will choose whether the power booster is activated or not:

                    -    when powered from USB the power booster is not activated (±30mA/10V available)
                    -    when powered from adapter the power booster is automatically activated

In this way the portable use of the USB powered CompactStat.h is preserved.