脫氣裝置
СММUR-1L MOBILE OIL PLANT 型號：СММUR-1LСММur-1L繼承了該系列的優良功能，同時實現了更小的體積和經濟的設計。
СММur-1L是一種精煉電氣絕緣油的設備，其粘度在50°C時為70cSt或以下，並去除水分和顆粒物。
該裝置可以用熱的變壓器油加熱充滿油的電氣設備，使空氣從真空系統中排出。
-
СММur-1L繼承了該系列的優良功能，同時實現了更小的體積和經濟的設計。
СММur-1L是一種精煉電氣絕緣油的設備，其粘度在50°C時為70cSt或以下，並去除水分和顆粒物。
該裝置可以用熱的變壓器油加熱充滿油的電氣設備，使空氣從真空系統中排出。
在多次通過過濾器後，該裝置保證油的淨化程度從最初的18/16級（污染物含量<0.004%）達到14/12級。
СММur-1L非常適合用於充滿油的高壓系統（如電力變壓器、高壓開關）的調試、維修和運轉。
優勢
- 體績小。可在各種交通工具中攜帶（地面、海上和空中）。
- 易於操作和維護。
- 介電強度從15 kV提高到75 kV，只需幾遍。
- 優化的加熱器設計提高了加熱率，而不需要過多的功率。
- 視鏡足夠大，便於目視監測油的處理情況。
-
№ Parameter
Value
1 Processing rate, m3/hour: 1.0
2 Max oil output temperature in heating mode, °С 60
3* Processed oil parameters (initial moisture less than 100 ppm): – filtration, μm
– minimum dielectric strength, kV
– ISO 4406 purity class
5
75
-/14/12
4 Output height relative to the outlet, meters 20
5 Max input pressure, MPa 0,1
6 Max output pressure, MPa 0,25
7 Oil heater power, kW 20,4
8 Mean heater surface power, W/cm2, max 1,1
9 Nominal power, kW 25
10 Three phase AC power (voltage, frequency) Custom
11 Max dimensions, mm – length
– width
– height
1500
1000
1255
12 Weight, kg, max 635
Note: * Initial oil parameters:
- moisture below 0.005% (50 ppm);
- oil heated to +60±5ºС for 30 minutes;
- gas content below 10%.
-
The СММur-1L continues the excellent functionality of this series of equipment, but is designed to be more compact and economical.
The СММur-1L purifies electrical insulation oil with viscosity below 70 cSt at 50o, removing water and particulate matter.
This device can heat oil-filled electrical equipment with hot transformer oil and evacuate air from vacuum systems.
The unit ensures oil purification according to class -/14/12 from initial class -/18/16 (contaminant content by weight less than 0.004%) after multiple passes of the product through the filters.
The СММur-1L is used in the course of commissioning, repairs and operation of oil-filled high voltage systems (power transformers, high voltage switches etc).
Advantages
- compact size. The unit can be carried by various vehicles (ground, sea, air);
- simple operation and maintenance;
- increase of dielectric strength from 15 to 75 kV in several passes;
- optimized heater design with increased heating rate without excessive power requirements;
- sight glass of sufficient size for simple visual monitoring of oil processing.
-
№ Parameter
Value
1 Processing rate, m3/hour: 1.0
2 Max oil output temperature in heating mode, °С 60
3* Processed oil parameters (initial moisture less than 100 ppm): – filtration, μm
– minimum dielectric strength, kV
– ISO 4406 purity class
5
75
-/14/12
4 Output height relative to the outlet, meters 20
5 Max input pressure, MPa 0,1
6 Max output pressure, MPa 0,25
7 Oil heater power, kW 20,4
8 Mean heater surface power, W/cm2, max 1,1
9 Nominal power, kW 25
10 Three phase AC power (voltage, frequency) Custom
11 Max dimensions, mm – length
– width
– height
1500
1000
1255
12 Weight, kg, max 635
Note: * Initial oil parameters:
- moisture below 0.005% (50 ppm);
- oil heated to +60±5ºС for 30 minutes;
- gas content below 10%.