真空脫氣機組
CMM-4/7 PORTABLE OIL DEGASSING UNIT 型號:CMM-4/7-
GlobeCore移動式真空脫氣機組,設計用於對最高電壓為1150 kV的電力變壓器的絕緣油進行脫氣、過濾固體雜質和加熱。
該設備的應用如下:
- 對含有絕緣油的電氣系統進行高溫加熱。
- 對變壓器進行真空乾燥。
- 進行抽真空。
該裝置最適合於安裝、維修和保養充油電力變壓器和其它充油電氣設備的裝置。
不允許在爆炸性或有毒氣體或其它侵蝕性環境中使用。在封閉的空間,如室內,廢氣必須通過軟管或管道排放到室外。
優勢
- 不使用吸附劑,所以不需要對變壓器油進行脫水處理。
- 沒有空氣污染,沒有廢物,不需要儲存或處理。
- 易於操作和維護。
- 在一次處理中獲得最大的油品性能。
- 低功率消耗。
- 低噪音。
- 可以安裝在拖車上,方便在現場移動使用。
-
Parameters Value Capacity, m3/hour / gals. per hour: - degassing, nitrogenation, drying and filtration mode
4/1059.0 - heating and filtration mode
7/1853.0 Capacity adjustment range, m3/hour / gals. per hour: 0.5-4.0/132-1059.0 Processed oil parameters*: - volumetric gas content %, max
0.1 - mass moisture content, g/ton, max
10 - ISO 4406 purity class
16/14/12 - filtration fineness, micron
5 - dielectric strength, kV, min
70 Oil temperature in heating mode, ºС/ ºF 90/194 Filtration rate ≥50 Outlet pressure, MPa 0.2 Oil output head, meters/yards 20/22 Oil heater power, kW 50±10% Oil heater mean surface power, W/cm2, max 1.15 Max power consumption, kW 65 Electric power - voltage, V
400 - AC frequency, Hz**
50/60 Dimensions, mm/ft - length
2650 / 8’9” - height
1730 / 5’8” - width
1350/ 4’5” Weight, kg/lbs 1330/2 933 Note: * initial oil parameters:
- volumetric gas content – below 10,5%;
- mass moisture content – below 0,05% (50 g/ton);
- temperature – above 0 ºС/ 32 ºF.
**All equipment sold in the USA is designed to operate on 60 Hz AC Power
Mobile oil plant – GlobeCore
-
This GlobeCore mobile oil processing unit is designed for degassing, removal of solids and heating of oil for power transformers with voltage up to 1,150 kV.
The unit can be used to: (1) heat electrical systems that contain insulating oil with hot oil; (2) for vacuum drying of transformers and (3) for vacuumizing. The unit is best suited to facilities that install, repair and service oil filled electric power transformers and other oil filled electrical equipment.
The unit is not certified for use in and around explosive gases, toxic gases or other aggressive environments.
When indoors or other enclosed spaces, exhaust gases must be vented to the outside through hoses or pipelines.
Advantages
- no need to use adsorbents to dehydrate transformer oil;
- operation of equipment causes no air pollution or waste requiring storage and disposal;
- easy to operate and maintain;
- maximum oil specifications even after one treatment cycle;
- low power consumption;
- low noise level;
- unit can be easily placed on a trailer and used on site.
-
Parameters Value Capacity, m3/hour / gals. per hour: - degassing, nitrogenation, drying and filtration mode
4/1059.0 - heating and filtration mode
7/1853.0 Capacity adjustment range, m3/hour / gals. per hour: 0.5-4.0/132-1059.0 Processed oil parameters*: - volumetric gas content %, max
0.1 - mass moisture content, g/ton, max
10 - ISO 4406 purity class
16/14/12 - filtration fineness, micron
5 - dielectric strength, kV, min
70 Oil temperature in heating mode, ºС/ ºF 90/194 Filtration rate ≥50 Outlet pressure, MPa 0.2 Oil output head, meters/yards 20/22 Oil heater power, kW 50±10% Oil heater mean surface power, W/cm2, max 1.15 Max power consumption, kW 65 Electric power - voltage, V
400 - AC frequency, Hz**
50/60 Dimensions, mm/ft - length
2650 / 8’9” - height
1730 / 5’8” - width
1350/ 4’5” Weight, kg/lbs 1330/2 933 Note: * initial oil parameters:
- volumetric gas content – below 10,5%;
- mass moisture content – below 0,05% (50 g/ton);
- temperature – above 0 ºС/ 32 ºF.
**All equipment sold in the USA is designed to operate on 60 Hz AC Power
Mobile oil plant – GlobeCore