0 like search mail home
選擇產品功能 arrow_down
>

LUBEChecker 超音波測漏設備

LUBEChecker 型號:LUBEChecker
  • LUBEChecker是專注於優化油脂補充的超音波解決方案。它是根據條件間隔進行潤滑的完美助手。
  • 非常易於使用。只需打開包裝盒,將其連接感測器,然後聽一下區別。其鮮豔的彩螢幕可提供可重複的、準確的數字測量結果,每次都可引導您獲得精確的結果。
  • 軸承故障和過度的油脂消耗超出你的底線,LUBEChecker潤滑檢測儀是你可以負擔得起的解決方案,建立在SDT一貫的高品質基礎上,以一個好的價格讓您聽取更多的聲音。
    • LUBEChecker是專注於優化油脂補充的超音波解決方案。它是根據條件間隔進行潤滑的完美助手。
    • 非常易於使用。只需打開包裝盒,將其連接感測器,然後聽一下區別。其鮮豔的彩螢幕可提供可重複的、準確的數字測量結果,每次都可引導您獲得精確的結果。
    • 軸承故障和過度的油脂消耗超出你的底線,LUBEChecker潤滑檢測儀是你可以負擔得起的解決方案,建立在SDT一貫的高品質基礎上,以一個好的價格讓您聽取更多的聲音。
  • 功能 超音波檢測設備
    可支援的 SDT LUBEsense 潤滑感測器
    測量通道 1個7針LEMO通道
    顯示 160 x128 像素的彩色OLED
    按鍵 5個功能鍵
    測量範圍 -6 到 99.9 dBμV(參考0 dB = 1μV,解析度0.1 dBμV)
    檢測頻帶 35 to 42 kHz
    信號放大 +30 to +102 in steps of 6 dB
    回應時間 < 9毫秒
    環境  
    工作溫度範圍 -10 to +50 °C /14 to 122°F
    防護等級 IP42
    設備  
    材料和重量 ABS, 164g | 5.78oz
    尺寸大小 158x59x38.5 mm /6.22”x2.32”x1.51”
    感測器連接 7針LEMO連接
    電源  
    電池 2個5號電池
    待機 4小時
    音訊  
    放大率 -24 to 0 dB by step of 6 dB
    最大輸出 +83dB SPL with 25dB NRR Peltor HQ SDT 耳機
    • Poor lubrication practices are a leading cause of bearing failure. LUBEChecker is an ultrasound solution focused on optimizing grease replenishment. It is the perfect companion for performing lubrication on condition based intervals.
    • LUBEChecker is so easy to use. Simply open the box, connect it to your grease gun, and hear the difference. Its vibrant colour display offers repeatable, accurate, digital measurements that guide you to a precision result every time.
    • Failed bearings and excessive grease consumption gnaw away at your bottom line. LUBEChecker is the affordable solution. Built with SDT quality, it’s offered at a price that makes you want to Hear More.
  • General
    Function Ultrasound measurement device
    Operable with LUBESense1
    Measurement interface 1 channel via a 7 pole LEMO connector
    Display 160x128 pixels Color OLED
    Keyboard 5 function keys
    Typical measurement range -6 to 99.9 dBµV (reference 0 dB = 1 µV)
    Resolution 0.1 digits
    Measurement bandwidth 35 to 42 kHz
    Signal amplification +30 dB to +102 dB by step of 6 dB
    RMS period time 250 milliseconds (main screen)
    Sampling frequency 64 kHz/ksps
    ADC Resolution 12 bits
    Environmental
    Operating temperature range -10 to +50 °C |14 to 122°F
    IP rating IP42
    EMC approvals EN 61326-1:2013, EN 55011:2016 + A1:2017, EN 61000-4-2:2009, EN 61000-4-3:2006 + A1:2008 + IS1:2009 +A2:2010
    Mechanical
    Housing material ABS
    Dimensions housing 158x59x38.5 mm |6.22”x2.32”x1.51”
    Weight 164g | 5.78oz
    Battery/Utility connector USB Mini-B 5-pin
    Power
    Battery 2 AA batteries
    Autonomy 7 hours
    Audio
    Operable with SDT provided head set only
    Maximum audio output (protection) +83dB SPL with SDT headset
    Headset 25 dB NRR Peltor quality heaphones