Electrothermal

• 

  HT9 Glass Fibre Heating Tapes

  HT9 Glass Fibre Heating Tapes

  HT9 Glass Fibre Heating Tapes

  • For high wattage applications
  • has a braided earth wire beneath the outer sheath
  • Operational temperature range up to 450°C
  • Cord is spiralled around the tube being heated to give a surface loading power concentration up to 0.62W/cm
  • Linear Loading: 164W/m (50W/ft)
  • Available in different lengths from 2 feet (61cm) to 32 feet (976cm)
  • Insulated unheated flexible lead at each end (9cm)
  • Approximate width of 25mm
  • All models have a voltage choice of 230V or 115V (except for HT95524 and HT95532 models which are available as 230V only)
  • For use in dry conditions only
  • Use of MC227 1-Way Controller, MC228X1 1-Way Controller or MC810B digital controller is recommended

  加入諮詢

  加入諮詢
• 

  MM Series Micro-Kjeldahl Extraction Heaters

  MM Series Micro-Kjeldahl Extraction Heaters

  MM Series Micro-Kjeldahl Extraction Heaters

  • Rugged, easy to clean stainless steel construction
  • Back-mounted brackets hold flask support rods (supplied with each unit)
  • 6 positions which can accommodate flasks of between 18 - 50ml capacity
  • Maximum element temperature range of 550°C to 800°C
  • Dedicated controllers for each recess are housed in a "cool zone"
  • Grounded stainless steel earth screen covering the heating element
  • Units are double fused for added safety

  加入諮詢

  加入諮詢
• 

  MQ Series Macro-Kjeldahl Extraction Equipment

  MQ Series Macro-Kjeldahl Extraction Equipment

  MQ Series Macro-Kjeldahl Extraction Equipment

  •  Rugged, easy to clean stainless-steel construction
  • Back-mounted brackets hold flask support rods (supplied with each unit)
  • Choice of 2 or 6 positions
  • Choice of 2 flask capacity sizes: 100 - 300ml and 500 - 800ml for both the 2 and 6 position models
  • Operates up to a maximum element temperature range of 550°C to 800°C
  • Dedicated controllers for each recess are housed in a "cool zone"
  • Grounded stainless steel earth screen covering the heating element
  • Units are double fused for added safety (except for the MQ3868B/E which is only available as the 230V model as it is wired in directly)

  加入諮詢

  加入諮詢
• 

  BA6101 Electric Bunsen

  BA6101 Electric Bunsen

  BA6101 Electric Bunsen

  • Conical shaped heating element directs radiant heat to the top cavity
  • Top cowl deflects heat away from your hand
  • Air circulation from the vented housing keeps the base cool enough to hold during operation
  • Burner consumes only 400W of power
  • Recommended controller is the MC5

  加入諮詢

  加入諮詢
• 

  Multi (Extraction) Mantles：6 Recess Model

  Multi (Extraction) Mantles：6 Recess Model

  Multi (Extraction) Mantles：6 Recess Model

  The Multi (Extraction) Mantle with six recesses has a built-in electronic controller and offers a choice of heater only (EME6) or heater/stirrer (EMEA6) combination models.<br>The vented case's unique air flow ensures the outer case remains safe to touch.

  加入諮詢

  加入諮詢
• 

  Multi (Extraction) Mantles：3 Recess Model

  Multi (Extraction) Mantles：3 Recess Model

  Multi (Extraction) Mantles：3 Recess Model

  The 3 place multi position (extraction) mantle has a built-in electronic controller and offers a choice of heater only (EME3) or heater/stirrer (EMEA3) combination.
  The vented case's unique air flow ensures the outer case remains safe to touch.

  加入諮詢

  加入諮詢
• 

  CMUV Electromantles

  CMUV Electromantles: For large volume flask and funnels

  CMUV Electromantles

  • Bottom opening accommodates 60° funnels of various diameters
  • Also accepts large capacity round bottom and pear-shaped flasks
  • Large capacity between 10 litres to 22 litres
  • Complete control of heating is provided by 3 separate electrical circuits that enable independent top, middle and bottom heating of flasks, each controlled with its own dial switch
  • Coiled heating element, suspended within a thermal insulating cartridge, provides maximum heat transfer and support
  • Replaceable insulated heater cartridge
  • Maximum element temperature 450°C
  • Built-in energy regulator
  • Indicator lamps for power and heater operation
  • An easy to clean powder coated aluminum outer casing
  • "Cool-to-touch" outer casing
  • Non-skid feet and 3 support rod brackets (does not include support rods)

  加入諮詢

  加入諮詢