代理品牌

• 

  濾芯式過濾設備

  ZP-260 SORBENT CARTRIDGES

  ZP-260

  ZP-260吸附劑濾芯是為乾燥潤滑油和電氣絕緣油而設計的，使用沸石或其它吸附劑，設計用於乾燥潤滑油和電氣絕緣油。該裝置有一個艙口，用於快速裝載和卸載吸附劑。除了沸石，該裝置還可以填充其它吸附劑，如富勒土或硅膠，使其適用於油品再生和降低酸度。

  加入諮詢

  加入諮詢
• 

  固定式變壓器乾燥設備

  CMM-260C STATIONARY TRANSFORMER DRYING UNIT

  CMM260C

  水是變壓器的一個危險的敵人，它降低了變壓器油的介電強度，加速了油和固體絕緣的老化。要完全防止水進入變壓器是不可能的，因為無論服務質量或設備的密封性如何，都會形成水。但是，可以通過使用連續乾燥裝置CMM-260C來保護變壓器。該設備與變壓器相連，將其油通過微孔顆粒狀的吸附劑，使變壓器在整個使用壽命內保持乾燥。水分被吸附並可靠地保留在其晶體中。

  加入諮詢

  加入諮詢
• 

  雙極電流放大器

  GMW Bipolar Current Amplifier

  231HC

  • GMW 231HC雙極電流放大器提供最高達到±70A、±160V的一個快速響應的真正雙極電流源，適用於 GMW電磁鐵包括機型5403、5403EG、5403AC、3472-70、3473-70及5451。
  • GMW 231HC整合了Copley Controls梯度放大器231HC型及電容器組、輔助電源供應器、冷卻風扇和National Instruments的USB-6251資料蒐集控制模組在一個19吋機架安裝機櫃中，可提供16位元解析USB或直接類比編程的電流輸出。
  • 搭配SGA DC電源供應器及GMW LVMCTRL LabVIEW控制軟體，可構成一套完整的電腦控制型雙極電源供應系統。

  加入諮詢

  加入諮詢
• 

  高速數位攝影機

  High-Speed Digital Cameras

  HS7

  高速度高解析Full HD（1920 x 1080）@2500fps，可讓HS7輕易捕捉到詳細的場景，進行令人驚嘆的慢動作播放。
  具備Binning模式 : 這對影像解析度要求不高，而又有高幀速要求的應用，可採用此技術。

  加入諮詢

  加入諮詢
• 

  ECC-Opto-SBS

  ECC-Opto-SBS

  ECC-Opto-SBS

  Test cell for optical characterization in the reflective mode – with side-by-side arrangement of electrodes.

  • Side-by-side (“face up”) arrangement of working and counter electrode
  • Both electrodes simultaneously seen through a sapphire window
  • Precisely adjustable distance of electrolyte gap between electrode edges

  加入諮詢

  加入諮詢
• 

  RAK Water and Ration Heaters

  RAK Water and Ration Heaters

  RAK

  • Heats 2 pints water and 5MREs in the vehicle while on the move
  • Contents remains hot for up to 6 hours after the unit has been switched off
  • " Cool to touch" outer casing
  • Designed-in " Boil Dry" condition and fail safe mechanisms
  • Connects to vehicles auxiliary power supply, 24 volts DC
  • Heating range 66 to 71°C (on LO setting)
  • Heating range 82 to 88°C (on HI setting)
  • Ramp rate of 56°C in one hour (max) from ambient temperature of 21°C

  加入諮詢

  加入諮詢
• 

  Integrity 10 Reaction Station

  Integrity 10 Reaction Station

  Integrity 10

  • 10 individual, independently controllable cells
  • Temperature range of -30°C to 150°C
  • Stirring rate of 350 rpm - 1200 rpm
  • For sample volumes of 1ml - 25ml
  • Optional attachments for refluxing, and working under inert conditions
  • Optional multi-infrared probes for solubility/crystallisation studies
  • Local control via colour touchscreen

  加入諮詢

  加入諮詢
• 

  OS1025 STEM Omni Reaction Station

  OS1025 STEM Omni Reaction Station

  OS1025

  • Interchangeable modular design
  • Greater stirring stability and stir speeds of 100 - 800 rpm
  • Simple menus and touchpad interface to control the system performance
  • All heater cartridges are equipped with "in block heaters" that allow temperatures up to 220°C.
  • High level of stability (± 1.5°C) across the heater cartridge itself
  • An external temperature probe to increase temperature accuracy to 0.5°C
  • An outer casing to retain the "cool to touch" safety feature that so many of our customers value
  • Selected cartridges can also be used in conjunction with a cooling plug to extend the temperature range from - 30°C to 220°C

  加入諮詢

  加入諮詢
• 

  HT9 Glass Fibre Heating Tapes

  HT9 Glass Fibre Heating Tapes

  HT9 Glass Fibre Heating Tapes

  • For high wattage applications
  • has a braided earth wire beneath the outer sheath
  • Operational temperature range up to 450°C
  • Cord is spiralled around the tube being heated to give a surface loading power concentration up to 0.62W/cm
  • Linear Loading: 164W/m (50W/ft)
  • Available in different lengths from 2 feet (61cm) to 32 feet (976cm)
  • Insulated unheated flexible lead at each end (9cm)
  • Approximate width of 25mm
  • All models have a voltage choice of 230V or 115V (except for HT95524 and HT95532 models which are available as 230V only)
  • For use in dry conditions only
  • Use of MC227 1-Way Controller, MC228X1 1-Way Controller or MC810B digital controller is recommended

  加入諮詢

  加入諮詢
• 

  MM Series Micro-Kjeldahl Extraction Heaters

  MM Series Micro-Kjeldahl Extraction Heaters

  MM Series Micro-Kjeldahl Extraction Heaters

  • Rugged, easy to clean stainless steel construction
  • Back-mounted brackets hold flask support rods (supplied with each unit)
  • 6 positions which can accommodate flasks of between 18 - 50ml capacity
  • Maximum element temperature range of 550°C to 800°C
  • Dedicated controllers for each recess are housed in a "cool zone"
  • Grounded stainless steel earth screen covering the heating element
  • Units are double fused for added safety

  加入諮詢

  加入諮詢