- Neware
- Pine Research
- OKOndt Group
- Novocontrol
- Norecs
- METERTEST
- Microrad
- Metrel
- Labdex
- SDT
- micrux
- AARONIA AG
- ADASH
- Amptek
- AOiP
- AstroNova
- AWSensors
- Automatic Research
- BASI
- BRS
- Cmc
- CTRL
- CALMET
- CHECKLINE
- C-Tech
- DV Power
- DANATRONICS
- ECH
- Elsys
- Enervac
- Enapter
- ELVEFLOW
- EA Technology
- EL-CELL
- ENERGY SUPPORT
- Electrothermal
- FASTEC
- GE
- GMW
- Gaskatel
- GIUSSANI
- Globecore
- GREENLIGHT
- GRZ
- HTW
- HIGH SENSE SOLUTIONSHTW
- HUBER
- Labnics
- Ida
- LIQUID
- Instytut Fotonowy
- KEHUA TECH
- JGG
- HVPD
- Jenway
- Jacomex
- IVIUM
- ndb
- OZM
- Redoxme
- Serstech
- SATIR
- VacCoat
- Zurich
- Neware
- Pine Research
- OKOndt Group
- Novocontrol
- Norecs
- METERTEST
- Microrad
- Metrel
- Labdex
- SDT
- micrux
- AARONIA AG
- ADASH
- Amptek
- AOiP
- AstroNova
- AWSensors
- Automatic Research
- BASI
- BRS
- Cmc
- CTRL
- CALMET
- CHECKLINE
- C-Tech
- DV Power
- DANATRONICS
- ECH
- Elsys
- Enervac
- Enapter
- ELVEFLOW
- EA Technology
- EL-CELL
- ENERGY SUPPORT
- Electrothermal
- FASTEC
- GE
- GMW
- Gaskatel
- GIUSSANI
- Globecore
- GREENLIGHT
- GRZ
- HTW
- HIGH SENSE SOLUTIONSHTW
- HUBER
- Labnics
- Ida
- LIQUID
- Instytut Fotonowy
- KEHUA TECH
- JGG
- HVPD
- Jenway
- Jacomex
- IVIUM
- ndb
- OZM
- Redoxme
- Serstech
- SATIR
- VacCoat
- Zurich
熱空氣乾燥機
SUKHOVEY (MOJAVE HEAT): HOT AIR DRYER UNIT 型號:MOJAVE HEAT-
Sukhovey (Mojave Heat)的熱空氣乾燥機裝置設計用於乾燥空氣,去除大氣中的固體顆粒和乾燥吸附劑。在安裝、服務和維修過程中,乾燥的淨化空氣可用於淨化變壓器油箱和電氣設備,防止濕氣積聚在裸露鐵芯的電介質絕緣子上。
該裝置設計有一個金屬主體,被分成兩個隔間。該裝置作為兩個獨立的吸附器運行,填充有合成沸石和灰塵過濾器,以去除空氣中的固體污染物。
優勢
- 保護絕緣系統不受潮。
- 分幾個階段進行耐壓,並對變壓器進行完整的組裝。
- 防止變壓器過熱。
-
Parameter
Value Mojave Heat 0.7 Mojave Heat 4 Dry air capacity, m3 /minute, min / cubic yard 1.7/2.223 2.5/3.27 Dry air dew point, °С/°F, max -50/-58 -50/-58 Dry air pressure, MPa/bar, max 0.018/0.18 0.025/0.25 Max dry air temperature, °С/°F 90±15/194±27 90±15/194±27 Adsorbent load, kg/lbs, max 190/419.9 190/419.9 Number of adsorbers. 1 2 Zeolite regeneration temperature, °С/°F, max 430/806 430/806 Air heater power, kW, Max 24 24 Nominal power consumption, kW max Air drying (normal operating mode) 1 5.05 Sorbent regeneration in one adsorber 25 30 Sorbent regeneration in two adsorbers – 55 Nominal power voltage at 50Hz/ 60Hz, V (Electric power can be fully customized on request ) 380 380 Output air temperature for regeneration of external adsorbents, °С/°F, max 430/806 430/806 Duration of adsorbent regeneration, hours 4 2-4 Dry air filtration fineness, micron 5 5 Dimensions, mm/ft, max: • length 1350/4’5’’ 1500/4’11’’ • width 800/2’8’’ 1200/3’11’’ • height 1700/5’7’’ 2100/6’11’’ Weight, kg/lbs, max 550/ 1,215.5 1050/ 2,320.5 -
The Sukhovey (Mojave Heat) hot air dryer unit is designed for drying of air and removal of solid particles from atmospheric air, as well as for sorbent drying. Dry purified air can be used for purging of transformer tanks and electrical equipment during installation, service or repairs to prevent dielectric insulation from accumulating moisture while the core is exposed.
The unit is designed as a metal body separated into two compartments. The unit operates as two independent adsorbers, filled with synthetic zeolite, and a dust filter to remove solid contaminants from the air.
Advantages
- protect the insulation system from moisture;
- carry out depressurization in several stages, with a complete assembly of transformer;
- prevent heating of transformer.
-
Parameter
Value Mojave Heat 0.7 Mojave Heat 4 Dry air capacity, m3 /minute, min / cubic yard 1.7/2.223 2.5/3.27 Dry air dew point, °С/°F, max -50/-58 -50/-58 Dry air pressure, MPa/bar, max 0.018/0.18 0.025/0.25 Max dry air temperature, °С/°F 90±15/194±27 90±15/194±27 Adsorbent load, kg/lbs, max 190/419.9 190/419.9 Number of adsorbers. 1 2 Zeolite regeneration temperature, °С/°F, max 430/806 430/806 Air heater power, kW, Max 24 24 Nominal power consumption, kW max Air drying (normal operating mode) 1 5.05 Sorbent regeneration in one adsorber 25 30 Sorbent regeneration in two adsorbers – 55 Nominal power voltage at 50Hz/ 60Hz, V (Electric power can be fully customized on request ) 380 380 Output air temperature for regeneration of external adsorbents, °С/°F, max 430/806 430/806 Duration of adsorbent regeneration, hours 4 2-4 Dry air filtration fineness, micron 5 5 Dimensions, mm/ft, max: • length 1350/4’5’’ 1500/4’11’’ • width 800/2’8’’ 1200/3’11’’ • height 1700/5’7’’ 2100/6’11’’ Weight, kg/lbs, max 550/ 1,215.5 1050/ 2,320.5