選擇品牌
- Neware
- Pine Research
- OKOndt Group
- Novocontrol
- Norecs
- METERTEST
- Microrad
- Metrel
- Labdex
- SDT
- micrux
- AARONIA AG
- ADASH
- Amptek
- AOiP
- AstroNova
- AWSensors
- Automatic Research
- BASI
- BRS
- Cmc
- CTRL
- CALMET
- CHECKLINE
- C-Tech
- DV Power
- DANATRONICS
- ECH
- Elsys
- Enervac
- Enapter
- ELVEFLOW
- EA Technology
- EL-CELL
- ENERGY SUPPORT
- Electrothermal
- FASTEC
- GE
- GMW
- Gaskatel
- GIUSSANI
- Globecore
- GREENLIGHT
- GRZ
- HTW
- HIGH SENSE SOLUTIONSHTW
- HUBER
- Labnics
- Ida
- LIQUID
- Instytut Fotonowy
- KEHUA TECH
- JGG
- HVPD
- Jenway
- Jacomex
- IVIUM
- ndb
- OZM
- Redoxme
- Serstech
- SATIR
- VacCoat
- Zurich
- Neware
- Pine Research
- OKOndt Group
- Novocontrol
- Norecs
- METERTEST
- Microrad
- Metrel
- Labdex
- SDT
- micrux
- AARONIA AG
- ADASH
- Amptek
- AOiP
- AstroNova
- AWSensors
- Automatic Research
- BASI
- BRS
- Cmc
- CTRL
- CALMET
- CHECKLINE
- C-Tech
- DV Power
- DANATRONICS
- ECH
- Elsys
- Enervac
- Enapter
- ELVEFLOW
- EA Technology
- EL-CELL
- ENERGY SUPPORT
- Electrothermal
- FASTEC
- GE
- GMW
- Gaskatel
- GIUSSANI
- Globecore
- GREENLIGHT
- GRZ
- HTW
- HIGH SENSE SOLUTIONSHTW
- HUBER
- Labnics
- Ida
- LIQUID
- Instytut Fotonowy
- KEHUA TECH
- JGG
- HVPD
- Jenway
- Jacomex
- IVIUM
- ndb
- OZM
- Redoxme
- Serstech
- SATIR
- VacCoat
- Zurich
半電池測試|腐蝕測試應用可加熱型伏安電解池
Gaskatel Heatable Voltammetry Cell for Half Cell Tests and Corrosion Tests 型號:FlexCell-PTFE- 為適用於腐蝕、電池、燃料電池應用的伏安電解池。
- 特別適用於氣體擴散電極、腐蝕測量及電池電極。
- 適用於所有平面材料。
- 可將造成測量誤差的根源例如IR壓降、場曲率線或由密封引起的邊界效應,降至最小程度。
- 可對工作電極提供氣體,因此也極適用於氣體擴散電極。
- 電解池主體由聚四氟乙烯(PTFE或稱鐵氟龍)製成。
- 可藉由整合的PTC加熱裝置,加熱至最高150°C。
-
- 為適用於腐蝕、電池、燃料電池應用的伏安電解池。
- 特別適用於氣體擴散電極、腐蝕測量及電池電極。
- 適用於所有平面材料。
- 可將造成測量誤差的根源例如IR壓降、場曲率線或由密封引起的邊界效應,降至最小程度。
- 可對工作電極提供氣體,因此也極適用於氣體擴散電極。
-
- 樣本尺寸:3x3cm2。
- 作用面積:3cm2。
- 電解池主體:由聚四氟乙烯(PTFE或稱鐵氟龍)製成。
- 可藉由整合的PTC加熱裝置,加熱至最高150°C。
- 適用電解質pH值-2~16。
- 對電極是由鉑絲(螺旋)製成。
- 小量電解液:40ml。
- 側邊鑽有Haber-Luggin毛細管,與工作電極為固定距離。
- 適用平面工作電極直徑2cm。
- 詳細規格、配件、軟體及選購,歡迎洽詢。
-
- Voltammetric Cell for Corrosion, Batteries, Fuel Cells
- Voltammetric cell especially for gas diffusion electrodes, corrosion measurement and battery electrodes.
- This test cell works for all flat materials!
- Measurment error sources like IR drop, curvature of field lines or boundary effects caused by the sealing are minimized.
- Gas feed of the working electrode possible, therefore well applicable for gas diffusion electrodes
-
- Sample size 3 x 3 cm².
- Active area 3 cm²
- Cell body made of PTFE
- Heatable up to 150 °C with integrated PTC heater
- The pH of the electrolyt can be pH -2 up to pH 16.
- Counter electrode made of Pt wire (spiral)
- Small electrolyte volume (40 ml)
- Haber-Luggin-capillary drilled on the side with fixed distance to the working electrode
- For plane working electrodes ∅ 2 cm
- Please feel free to contact for detailed specifications, accessories, software and options.